This page uses machine translation from English, which may contain errors or unclear language. For the most accurate information, please see the original English version. Some content may be in the original English due to frequent updates. Help us improve this page's translation by joining our effort on Crowdin. (Crowdin translation page, Contributing guide)

Transfer Value

As explained in the Kaia design section, Service Chain supports value (KAIA, ERC-20, and ERC-721) transfer between parent chain & child chain. This page shows how to enable the value-transfer feature in SCN.

After setting up the EN and SCN, the following procedure is required to enable value-transfer between chains.

1. Check the addresses of the bridge operator accounts and add KAIA to the bridge operator accounts.
2. Deploy the bridge contract to the parent/child chains.
3. Deploy a token (ERC-20 or 721) contract to the parent/child chains. (If you just need KAIA-transfer, you can skip step 3 & 4.)
4. Register the token contracts with the bridge contracts on the parent/child chains.
5. Subscribe to the bridge contracts on the parent/child chains.

Before we follow the steps, let's take a look at the high-level system architecture to understand the behind of the mechanism.

System Architecture

Figure 1 shows the system architecture of the Service Chain with bridge/token contracts and bridge nodes.

Below contracts communicate with each other via main/sub-bridge to process user's value transfer requests.

• Bridge contract
• ERC-20 contract (if needed)
• ERC-721 contract (if needed)

Bridge Operator Account

For ServiceChain, there are two operator accounts: parent chain bridge operator account, service chain bridge operator account. Each operator account is used to sign transactions. If the transaction moves the value to the parent chain, the parent chain bridge operator account signs the transaction. To the child chain, the child chain bridge operator account is used. If a user submits a "request value transfer" transaction, the Sub-bridge creates a "handle value transfer" transaction signed by the bridge operator account. Therefore, the parent chain bridge operator needs enough KAIA in their balance to pay the transaction fee to the parent chain. If the service chain's gas price is set to non-zero, the service chain bridge operator should have KAIA in their balance as well.

Keystore and Password file

When SCN is booted, the keystore files and password files for the parent/child operators are automatically generated if their keys don't exist. If you want to use a specific account as an operator, you can provide the key. Place the below files in the designated path before booting the SCN. The password file should have a password string of the keystore file. The password file name should be the account address of the corresponding keystore file.

files

• keystore file : UTC--2019-10-21T04-05-41.493850000Z--2ed72a9d7fe5da7672fd21567e07302431649b0b
• password file : 0x2eD72a9D7fe5da7672fD21567e07302431649B0B

file path

• Parent chain bridge operator : $datadir/parent_bridge_account
• Child chain bridge operator : $datadir/child_bridge_account

> pwd

/$dataDIR/child_bridge_account

> ls

0x2eD72a9D7fe5da7672fD21567e07302431649B0B

UTC--2019-10-21T04-05-41.493850000Z--2ed72a9d7fe5da7672fd21567e07302431649b0b

> cat 0x2eD72a9D7fe5da7672fD21567e07302431649B0B

%S~f5qqM38cB47jL%

> cat UTC--2019-10-21T04-05-41.493850000Z--2ed72a9d7fe5da7672fd21567e07302431649b0b

{"address":"2ed72a9d7fe5da7672fd21567e07302431649b0b","crypto":{"cipher":"aes-128-ctr","ciphertext":"6486509e8158bf4984608cbc5562cf2c9a27cd988a98e543731b39251144e633","cipherparams":{"iv":"96d7e5b6a936278c0797faae6cb3d903"},"kdf":"scrypt","kdfparams":{"dklen":32,"n":262144,"p":1,"r":8,"salt":"8928ba41b8228af19390ec881c51452fa3ea973ad2c253ca0f5bc9197a8b24c4"},"mac":"9c8ec63694c20a473e0ea33840e7d16e9f1a20afc52b3244b703a3ac0a66cfa3"},"id":"9ae10527-7fd3-4aae-a4eb-316af211494e","version":3}

Check Bridge Operator Addresses

If you run SCN successfully, you can check the parent/child chain bridge operator address using RPC API like the following.

$ kscn attach --datadir ~/kscnd_home

Welcome to the Kaia JavaScript console!

instance: Kaia/vvX.X.X/XXXX-XXXX/goX.X.X

datadir: ~/kscnd_home

modules: admin:1.0 subbridge:1.0 debug:1.0 governance:1.0 istanbul:1.0 klay:1.0 miner:1.0 net:1.0 personal:1.0 rpc:1.0 servicechain:1.0 txpool:1.0

> subbridge.parentOperator

"0xA057995175B93Ee0D1bdfA54f078Ad0F0116130b"

> subbridge.childOperator

"0x5C1C757a6Cb6c6FcEFE398674D8209FDA2A74Df4"

You can refer to the subbridge API for more details.

Send KAIA to Bridge Operators

Like anchoring, the parent chain bridge operator needs KAIA to make a value-transfer transaction. If the service chain's gas price is set to non-zero, the service chain bridge operator should have KAIA in their balance as well.

After topping up the operator accounts, you can check their balances like below.

Parent chain bridge operator

$ kscn attach --datadir ~/kscnd_home

Welcome to the Kaia JavaScript console!

instance: Kaia/vvX.X.X/XXXX-XXXX/goX.X.X

datadir: ~/kscnd_home

modules: admin:1.0 subbridge:1.0 debug:1.0 klay:1.0 miner:1.0 net:1.0 personal:1.0 rpc:1.0 txpool:1.0 web3:1.0

> subbridge.parentOperatorBalance

1e+50

Child chain bridge operator

$ kscn attach --datadir ~/kscnd_home

Welcome to the Kaia JavaScript console!

instance: Kaia/vvX.X.X/XXXX-XXXX/goX.X.X

datadir: ~/kscnd_home

modules: admin:1.0 subbridge:1.0 debug:1.0 klay:1.0 miner:1.0 net:1.0 personal:1.0 rpc:1.0 txpool:1.0 web3:1.0

> subbridge.childOperatorBalance

1e+50

Bridge Contract

For the cross-chain value transfer, a bridge contract should be deployed to the parent/child chains. Users can request a KAIA transfer to the bridge contract to send their KAIA to the other chain. Additionally, if token contracts are registered in the bridge contracts, bridge contracts can handle the token transfer between parent and child chains.

Deployment

Sub-bridge provides a bridge contract deployment API. You can deploy bridge contracts to both chains using a single RPC call as below. Before doing this, you should have connected main-bridge and sub-bridge. Please refer to Bridge Configuration to get detailed guideline.

$ kscn attach --datadir ~/kscnd_home

Welcome to the Kaia JavaScript console!

instance: Kaia/vvX.X.X/XXXX-XXXX/goX.X.X

datadir: ~/kscnd_home

modules: admin:1.0 subbridge:1.0 debug:1.0 governance:1.0 istanbul:1.0 klay:1.0 miner:1.0 net:1.0 personal:1.0 rpc:1.0 servicechain:1.0 txpool:1.0

> subbridge.deployBridge()

["0x27caeba831d98b5fbb1d81ce0ed20801702f443a", "0x22c41ae528627b790233d2e59ea520be12350eb5"]

> subbridge.listBridge

[{

localAddress: "0x27caeba831d98b5fbb1d81ce0ed20801702f443a",

remoteAddress: "0x22c41ae528627b790233d2e59ea520be12350eb5",

subscribed: false

}]

You can refer to the subbridge API for more details.

subbridge_listBridge shows the bridge contract addresses and their subscription status. Sub-bridge saves the list of bridge contract addresses in a file. On reboot, sub-bridge reloads the bridge contract list from the file.

Subscribing

After deploying the bridge contract, you should make the sub-bridge subscribe to the deployed bridge contracts to enable value transfer. This can be done using another RPC API call, subbridge_subscribeBridge.

> subbridge.subscribeBridge("0x27caeba831d98b5fbb1d81ce0ed20801702f443a", "0x22c41ae528627b790233d2e59ea520be12350eb5")

null

> subbridge.listBridge

[{

localAddress: "0x27caeba831d98b5fbb1d81ce0ed20801702f443a",

remoteAddress: "0x22c41ae528627b790233d2e59ea520be12350eb5",

subscribed: true

}]

Checking Status

Once subscribed, SCN processes users' "request value transfer" transactions automatically. This section explains how to check the bridge contract status.

In a bridge contact, there are two nonces, requestNonce and handleNonce. Unlike in-chain transactions, the sub-bridge can handle a higher nonce request before the lower ones.

• requestNonce : the number of user's "cross-chain value transfer" requests made to this bridge contract.
• handleNonce : the highest nonce that the sub-bridge handled.
• lowerHandleNonce : the lowest nonce that the sub-bridge should handle.

Therefore, if nonces are updated as follows, we can say the cross-chain value-transfers are processed correctly.

• "handleNonce" and "lowerHandleNonce" of the parent chain bridge contract keep approaching to the "requestNonce" of the child chain bridge contract.
• "handleNonce" and "lowerHandleNonce" keep approaching to the "requestNonce" of the parent chain bridge contract.

If "handleNonce" equals to the "requestNonce" of the counterpart bridge contract, and the "lowerHandleNonce" is greater than "handleNonce" by 1, then users' requests were all processed.

Log

Below is a typical log output from a SCN during normal operation. Every 1 second, the status of bridge contracts are printed.

INFO[10/16,19:37:40 +09] [45] VT : Parent -> Child Chain request=8699 handle=4826 lowerHandle=4826 pending=3873

INFO[10/16,19:37:40 +09] [45] VT : Child -> Parent Chain request=7894 handle=4207 lowerHandle=4207 pending=3687

This log shows the request, handle, lowerHandle, and pending nonces. Each value means like below

• request : the sum of value-transfer request nonce(s) of all subscribed bridge contract(s).
• handle : the sum of upper handle nonce(s) of all subscribed bridge contract(s).
• lowerHandle : the sum of lower handle nonce(s) of all subscribed bridge contract(s).
• pending : the difference between request and lowerHandle.

RPC API

You can check the status of a bridge contract like below. You can refer to the subbridge API for more details.

> subbridge.getBridgeInformation("0x27caeba831d98b5fbb1d81ce0ed20801702f443a")

{

counterPart: "0x22c41ae528627b790233d2e59ea520be12350eb5",

handleNonce: 0,

lowerHandleNonce: 0,

isRunning: true,

isSubscribed: true,

onServiceChain: true,

pendingEventSize: 0,

requestNonce: 0

}

Token Contract (ERC-20/721)

Service Chain supports ERC-20/721 value transfer as well. To support them, service chain compatible ERC-20/721 token contracts should be deployed on both parent and child chains. For the ERC-20/721 token contract code, you can refer to the Token standard.

Deployment

SCN does not support an API to deploy ERC-20/721 tokens yet. You need to deploy the tokens via caver-js. When you deploy an ERC-20/721 contract, you should use the correct bridge operator account. Use the parent operator account for the main chain deploy, and the child operator for the service chain deploy. If a token contract was deployed with a wrong account, value transferring will not work and you need to deploy the token contract again with the correct account.

Register

After deploying token contracts, you should register the token contracts with the bridge contracts on the parent/child chains like below.

> subbridge.registerToken("0x27caeba831d98b5fbb1d81ce0ed20801702f443a", "0x22c41ae528627b790233d2e59ea520be12350eb5", "0x376b72abe1b29cace831bd3f5acdfa967814c9cd", "0x53160735f7cc6ff75e48619f368bb94daff66a1b")

null

This command registers the child chain token ("0x376b72abe1b29cace831bd3f5acdfa967814c9cd") with the child chain bridge contract ("0x27caeba831d98b5fbb1d81ce0ed20801702f443a"). And the parent chain token ("0x53160735f7cc6ff75e48619f368bb94daff66a1b") with the parent chain bridge contract ("0x22c41ae528627b790233d2e59ea520be12350eb5").

You can refer to the Service Chain API for more details.

Request Value Transfer

This section explains the contract methods that will be invoked by a user to request a value transfer. Request transaction does not allow zero value (KAIA/ERC-20).

KAIA transfer

Users can make a "request value transfer" transaction to the bridge contract using the below methods.

fallback

If a user calls the fallback function of the bridge, this requests a KAIA transfer to the same account address as the requesting user in the counterpart chain.

function () external payable;

requestKAIATransfer

If a user calls this function with _to, this requests a KAIA transfer to _to address in the counterpart chain.

function requestKAIATransfer(address _to, uint256 _value, bytes calldata _extraData) external payable

ERC-20 transfer

2-Step request via Bridge contract

Users can make a "request value transfer" transaction to the Bridge contract using the below method after approving the token to the Bridge contract.

function requestERC20Transfer(address _tokenAddress, address _to, uint256 _value,uint256 _feeLimit,bytes memory _extraData) external

1-Step request via ERC-20 contract

Users can make a "request value transfer" transaction directly to the ERC-20 contract using the below method without approving. The ERC-20 contract should implement the function, then.

function requestValueTransfer(uint256 _amount, address _to, uint256 _feeLimit, bytes calldata _extraData) external

ERC-721 transfer

2-Step request via Bridge contract

Users can make a "request value transfer" transaction to the Bridge contract using the below method after approving the token to the Bridge contract.

function requestERC721Transfer(address _tokenAddress, address _to, uint256 _tokenId, bytes memory _extraData) external

1-Step request via ERC-721 contract

Users can make a "request value transfer" transaction directly to the ERC-721 contract using the below method without approving. The ERC-721 contract should implement the function, then.

function requestValueTransfer(uint256 _uid, address _to) external

onERC721Received()

The ERC-721 standard has the onERC721Received callback function. The onERC721Received() works with safeTransferFrom() function, but the current bridge contract implementation uses transferFrom(), which means the onERC721Recieved() is not expected to be called.

Alternatively, a further action like onERC721Recieved() should be implemented in another way such as event listening (e.g., event Transfer(address indexed _from, address indexed _to, uint256 indexed _tokenId)).

Value Transfer Recovery

Value transfer request may be fail for a number of reasons. Say you requested KAIA transfer from subbridge to mainbridge or from mainbridge to subbridge. In that case, the bridge contract on the receiver side must have enough KAIA than the requested amount of KAIA. If not, the transfer would fail without error notification in the return value. A feature of value transfer recovery finds unhandled events and insert them into event pool again in a given interval, which means the failed transaction can be succeed again when the counterpart bridge can successfully handle that event. In case of the above example, the failed transaction would be eventually handled by value transfer recovery when the counterpart bridge has enough KAIA. In order to set the value transfer recovery as default, you need to set two properties:

SC_VTRECOVERY=1

SC_VTRECOVERY_INTERVAL=5

The value transfer recovery runs automatically by set SC_VTRECOVERY=1. SC_VTRECOVERY_INTERVAL means an interval how often the value transfer recovery is executed.

Collecting Fee for KAIA/ERC-20 transfer

In ServiceChain, there is a fee collecting feature for KAIA/ERC-20 transfers.

To be updated soon.

Customizing your Bridge Contract

In ServiceChain, you can use your own customized Bridge contract that inherits from the original Bridge contract for your own unique service. This section explains how to customize the Bridge contract and presents the example code.

It will be updated soon.