Configuration
This document explains the configurable properties of the node. Kaia node package ships with good defaults and requires very little configuration. If you changed any settings of a running node, you must restart the node to reflect the changes.
CN Configuration File location
kcnd.conf
for configuring the Consensus Node
The configuration file is located in the conf
directory, whose default location depends on whether or not the installation is from an archive distribution (tar.gz
) or a package distribution (RPM).
- For the archive distribution, the config directory location defaults to
$INSTALL_PATH/kcn-linux-amd64/conf/
. - For the package distribution, the config directory defaults to
/etc/kcnd/conf/
.
PN Configuration File location
kpnd.conf
for configuring the Proxy Node
The configuration file is located in the conf
directory, whose default location depends on whether or not the installation is from an archive distribution (tar.gz
) or a package distribution (RPM).
- For the archive distribution, the config directory location defaults to
$INSTALL_PATH/kpn-linux-amd64/conf/
. - For the package distribution, the config directory defaults to
/etc/kpnd/conf/
.
EN Configuration File location
kend.conf
for configuring the Endpoint Node
The configuration file is located in the conf
directory, whose default location depends on whether or not the installation is from an archive distribution (tar.gz
) or a package distribution (RPM).
- For the archive distribution, the config directory location defaults to
$INSTALL_PATH/ken-linux-amd64/conf/
. - For the package distribution, the config directory defaults to
/etc/kend/conf/
.
Configuration File Format
CN and PN have the same configuration file format and the properties.
Below is a sample configuration file for the CN that participates in the mainnet and stores the blockchain data in the default location, which is ~/kcnd_home
with the archive distribution, /var/kcnd/data
with the package distribution.
# Configuration file for the kcnd# mainnet, kairos is only available if you don't specify NETWORK_ID.NETWORK="mainnet"# if you specify NETWORK_ID, a private network is created.NETWORK_ID=PORT=32323SERVER_TYPE="fasthttp"SYNCMODE="full"VERBOSITY=3MAXCONNECTIONS=100# LDBCACHESIZE=10240REWARDBASE="0x0"...DATA_DIR=LOG_DIR=$DATA_DIR/logs
The recommended txpool sizes for CN are as follows.
TXPOOL_EXEC_SLOTS_ALL=16384TXPOOL_NONEXEC_SLOTS_ALL=16384TXPOOL_EXEC_SLOTS_ACCOUNT=16384TXPOOL_NONEXEC_SLOTS_ACCOUNT=16384
The recommended txpool sizes for PN are as follows.
TXPOOL_EXEC_SLOTS_ALL=8192TXPOOL_NONEXEC_SLOTS_ALL=8192TXPOOL_EXEC_SLOTS_ACCOUNT=8192TXPOOL_NONEXEC_SLOTS_ACCOUNT=8192
The recommended txpool sizes for EN are as follows.
TXPOOL_EXEC_SLOTS_ALL=4096TXPOOL_NONEXEC_SLOTS_ALL=4096TXPOOL_EXEC_SLOTS_ACCOUNT=4096TXPOOL_NONEXEC_SLOTS_ACCOUNT=4096
Properties
The configuration file has the following configurable properties. CN and PN configuration files have the same properties except REWARDBASE.
Name | Description |
---|---|
NETWORK | Network name that this node will join. This value is used when NETWORK_ID is not defined. ("mainnet", "kairos") |
NETWORK_ID | Kaia network ID. If you create a local private network, you will define the network ID for your own. Following IDs are reserved for pre-configured networks. 8217 : Mainnet 1000 : Aspen test network 1001 : Kairos test network |
PORT | P2P port. (Default: "32323") |
SERVER_TYPE | JSON RPC server type. ("http", "fasthttp") |
SYNCMODE | Blockchain sync mode. ("fast", "full") |
VERBOSITY | Logging verbosity. (0=silent, 1=error, 2=warn, 3=info, 4=debug, 5=detail) |
MAXCONNECTIONS | Maximum number of physical connections. All single-channel peers can have up to MAXCONNECTIONS peers. All multi-channel peers can have up to MAXCONNECTIONS/2 peers. Network connection is disabled if it is set to 0. (Default: 10) |
LDBCACHESIZE | Size of in-memory cache in LevelDB (MiB). (Default : 768) |
REWARDBASE | Account address that will receive block consensus rewards. This property only applies to CN. |
TXPOOL_EXEC_SLOTS_ALL | Maximum number of executable transaction slots for all accounts. (Default: 4096) |
TXPOOL_NONEXEC_SLOTS_ALL | Maximum number of non-executable transaction slots for all accounts. (Default: 1024) |
TXPOOL_EXEC_SLOTS_ACCOUNT | Number of executable transaction slots guaranteed per account. (Default: 16) |
TXPOOL_NONEXEC_SLOTS_ACCOUNT | Maximum number of non-executable transaction slots guaranteed per account. (Default: 64) |
TXPOOL_LIFE_TIME | Maximum amount of time non-executable transactions is queued. (Default : 5m) |
RPC_ENABLE | Enable the HTTP-RPC server if it is set to 1. |
RPC_API | Comma-separated list of APIs offered over the HTTP-RPC interface. (admin, debug, klay, miner, net, personal, rpc, txpool, web3) |
RPC_PORT | HTTP-RPC server listening port. (Default: "8551") |
RPC_ADDR | HTTP-RPC server listening interface. (Default: "localhost") |
RPC_CORSDOMAIN | Comma-separated list of domains from which to accept cross-origin requests (browser enforced) |
RPC_VHOSTS | Comma-separated list of virtual hostnames from which to accept requests (server enforced). Accepts '*' wildcard. (Default: localhost) |
WS_ENABLE | Enable the WS-RPC server if it is set to 1. |
WS_API | APIs offered over the WS-RPC interface. (admin, debug, klay, miner, net, personal, rpc, txpool, web3) |
WS_ADDR | WS-RPC server listening interface. |
WS_PORT | WS-RPC server listening port. (Default : "8552") |
WS_ORIGINS | Origins from which to accept websockets requests. (Default: "localhost") |
AUTO_RESTART | Restart the process when the current block has not been updated for autorestart.timeout (e.g., 60s, 10m and 1h) if it is set to 1. |
METRICS | Enable metrics collection and reporting if it is set to 1. |
PROMETHEUS | Enable prometheus exporter if it is set to 1. |
DB_NO_PARALLEL_WRITE | Disable parallel writes of block data to persistent database if it is set to 1. |
MULTICHANNEL | Create a dedicated channel for block propagation if it is set to 1. |
SUBPORT | Listening sub port number if multichannel option is enabled. (Default : "32324") |
NO_DISCOVER | Turn off the discovery option if it is set to 1. |
BOOTNODES | Comma-separated kni addresses of bootstrap nodes. |
ADDITIONAL | For additional command-line options. e.g) --txpool.nolocals |
DATA_DIR | Kaia blockchain data folder path. |
LOG_DIR | Log folder path. |