Skip to main content

Partial Fee delegation type transaction class

FeeDelegatedValueTransferWithRatio


caver.transaction.feeDelegatedValueTransferWithRatio.create(transactionObject)

FeeDelegatedValueTransferWithRatio represents a fee delegated value transfer with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedValueTransferWithRatio transaction.

FeeDelegatedValueTransferWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedValueTransfer transaction.

note

NOTE: You can create an instance of FeeDelegatedValueTransferWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedValueTransferWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedValueTransferWithRatio({...}), please change it to caver.transaction.feeDelegatedValueTransferWithRatio.create({...}).

properties

NameTypeDescription
valuestringThe amount of KAIA in peb to be transferred. You can use caver.utils.toPeb.
fromstringThe address of the sender.
tostringThe account address that will receive the transferred value.
gasstringThe maximum amount of transaction fee the transaction is allowed to use.
feeRatiostringThe ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.
signaturesArray(optional) An array of signatures.
feePayerSignaturesArray(optional) An array of feePayerSignatures.
feePayerstring(optional) The address of fee payer.
noncestring(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.
gasPricestring(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.
chainIdstring(optional) The chain id of the kaia network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example


// Create a feeDelegatedValueTransferWithRatio
> caver.transaction.feeDelegatedValueTransferWithRatio({
from: '0x{address in hex}',
to: '0x9957dfd92e4b70f91131c573293343bc5f21f215',
value: caver.utils.toPeb(1, 'KLAY'),
gas: 25000,
feeRatio: 30,
})
// Create a feeDelegatedValueTransferWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedValueTransferWithRatio('0x0af8d78204d219830f4240947b65b75d204abed71587c9e519a89277766ee1d00a94a94f5374fce5edbc8e2a8697c15331677e6ebf0b1ef845f84325a0dde32b8241f039a82b124fe94d3e556eb08f0d6f26d07dcc0f3fca621f1090caa01c8c336b358ab6d3a2bbf25de2adab4d01b754e2fb3b9b710069177d54c1e956945a0043070275d9f6054307ee7348bd660849d90ff845f84326a0091ecf53f91bb97bb694f2f2443f3563ac2b646d651497774524394aae396360a044228b88f275aa1ec1bab43681d21dc7e3a676786ed1906f6841d0a1a188f88a')
FeeDelegatedValueTransferWithRatio {
_type: 'TxTypeFeeDelegatedValueTransferWithRatio',
_from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
_gas: '0xf4240',
_nonce: '0x4d2',
_gasPrice: '0x19',
_signatures: [ SignatureData { _v: '0x25', _r: '0xdde32...', _s: '0x1c8c3...' } ],
_feePayer: '0x5a0043070275d9f6054307ee7348bd660849d90f',
_feePayerSignatures: [ SignatureData { _v: '0x26', _r: '0x091ec...', _s: '0x44228...' } ],
_feeRatio: '0x1e',
_to: '0x7b65b75d204abed71587c9e519a89277766ee1d0',
_value: '0xa'
}

FeeDelegatedValueTransferMemoWithRatio


caver.transaction.feeDelegatedValueTransferMemoWithRatio.create(transactionObject)

FeeDelegatedValueTransferMemoWithRatio represents a fee delegated value transfer memo with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedValueTransferMemoWithRatio transaction.

FeeDelegatedValueTransferMemoWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedValueTransferMemoWithRatio transaction.

note

NOTE: You can create an instance of FeeDelegatedValueTransferMemoWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedValueTransferMemoWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedValueTransferMemoWithRatio({...}), please change it to caver.transaction.feeDelegatedValueTransferMemoWithRatio.create({...}).

properties

NameTypeDescription
valuestringThe amount of KAIA in peb to be transferred. You can use caver.utils.toPeb.
fromstringThe address of the sender.
tostringThe account address that will receive the transferred value.
inputstringData attached to the transaction. The message should be passed to this property.
gasstringThe maximum amount of transaction fee the transaction is allowed to use.
feeRatiostringThe ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.
signaturesArray(optional) An array of signatures.
feePayerSignaturesArray(optional) An array of feePayerSignatures.
feePayerstring(optional) The address of fee payer.
noncestring(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.
gasPricestring(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.
chainIdstring(optional) The chain id of the kaia network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example


// Create a feeDelegatedValueTransferMemoWithRatio
> caver.transaction.feeDelegatedValueTransferMemoWithRatio({
from: '0x{address in hex}',
to: '0x9957dfd92e4b70f91131c573293343bc5f21f215',
value: caver.utils.toPeb(1, 'KLAY'),
gas: 25000,
input: '0x68656c6c6f',
feeRatio: 30,
})
// Create a feeDelegatedValueTransferMemoWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedValueTransferMemoWithRatio('0x12f8dd8204d219830f4240947b65b75d204abed71587c9e519a89277766ee1d00a94a94f5374fce5edbc8e2a8697c15331677e6ebf0b8568656c6c6f1ef845f84326a0769f0afdc310289f9b24decb5bb765c8d7a87a6a4ae28edffb8b7085bbd9bc78a06a7b970eea026e60ac29bb52aee10661a4222e6bdcdfb3839a80586e584586b4945a0043070275d9f6054307ee7348bd660849d90ff845f84325a0c1c54bdc72ce7c08821329bf50542535fac74f4bba5de5b7881118a461d52834a03a3a64878d784f9af91c2e3ab9c90f17144c47cfd9951e3588c75063c0649ecd')
FeeDelegatedValueTransferMemoWithRatio {
_type: 'TxTypeFeeDelegatedValueTransferMemoWithRatio',
_from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
_gas: '0xf4240',
_nonce: '0x4d2',
_gasPrice: '0x19',
_signatures: [ SignatureData { _v: '0x26', _r: '0x769f0...', _s: '0x6a7b9...' } ],
_feePayer: '0x5a0043070275d9f6054307ee7348bd660849d90f',
_feePayerSignatures: [ SignatureData { _v: '0x25', _r: '0xc1c54...', _s: '0x3a3a6...' } ],
_feeRatio: '0x1e',
_to: '0x7b65b75d204abed71587c9e519a89277766ee1d0',
_value: '0xa',
_input: '0x68656c6c6f'
}

FeeDelegatedAccountUpdateWithRatio


caver.transaction.feeDelegatedAccountUpdateWithRatio.create(transactionObject)

FeeDelegatedAccountUpdateWithRatio represents a fee delegated account update with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedAccountUpdateWithRatio transaction.

FeeDelegatedAccountUpdateWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedAccountUpdateWithRatio transaction.

note

NOTE: You can create an instance of FeeDelegatedAccountUpdateWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedAccountUpdateWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedAccountUpdateWithRatio({...}), please change it to caver.transaction.feeDelegatedAccountUpdateWithRatio.create({...}).

properties

NameTypeDescription
fromstringThe address of the sender.
account[Account]An [Account] instance that contains the information needed to update your account.
gasstringThe maximum amount of transaction fee the transaction is allowed to use.
feeRatiostringThe ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.
signaturesArray(optional) An array of signatures.
feePayerSignaturesArray(optional) An array of feePayerSignatures.
feePayerstring(optional) The address of fee payer.
noncestring(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.
gasPricestring(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.
chainIdstring(optional) The chain id of the kaia network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

For how to create an [Account] instance for each AccountKey type, refer to Getting Started - Account Update or caver.account.create.

Example


// Create a feeDelegatedAccountUpdateWithRatio
> caver.transaction.feeDelegatedAccountUpdateWithRatio({
from: '0x{address in hex}',
gas: 50000,
account: caver.account.createWithAccountKeyLegacy('0x{address in hex}'),
feeRatio: 30,
})
// Create a feeDelegatedAccountUpdateWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedAccountUpdateWithRatio('0x22f8ec018505d21dba00830493e0945c525570f2b8e7e25f3a6b5e17f2cc63b872ece7a302a102a1d2af887950891813bf7d851bce55f47246a5269a5d4be1fc0ab78d78ae0f5a1ef847f845820feaa08553a692cd8f86af4d335785468a5b4527ee1a2d0c5e18517fe39375e4e82d85a0698db3a07cc81427eb8ea877bb8af33d66abfb29526f58db6997eb99010be4fd94294f5bc8fadbd1079b191d9c47e1f217d6c987b4f847f845820feaa0a44cbc6e30f9df61633ed1714014924b8b614b315288cdfd795c5ba18d36d5d8a0011611104f18e3bb3d32508317a0ce6d31f0a71d55e2363b02a47aabbc7bf9d4')
FeeDelegatedAccountUpdateWithRatio {
_type: 'TxTypeFeeDelegatedAccountUpdateWithRatio',
_from: '0x5c525570f2b8e7e25f3a6b5e17f2cc63b872ece7',
_gas: '0x493e0',
_nonce: '0x1',
_gasPrice: '0x5d21dba00',
_signatures: [ SignatureData { _v: '0x0fea', _r: '0x8553a...', _s: '0x698db...' } ],
_feePayer: '0x294f5bc8fadbd1079b191d9c47e1f217d6c987b4',
_feePayerSignatures: [ SignatureData { _v: '0x0fea', _r: '0xa44cb...', _s: '0x01161...' } ],
_feeRatio: '0x1e',
_account: Account {
_address: '0x5c525570f2b8e7e25f3a6b5e17f2cc63b872ece7',
_accountKey: AccountKeyPublic { _publicKey: '0x02a1d...' }
}
}

FeeDelegatedSmartContractDeployWithRatio


caver.transaction.feeDelegatedSmartContractDeployWithRatio.create(transactionObject)

FeeDelegatedSmartContractDeployWithRatio represents a fee delegated smart contract deploy with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedSmartContractDeployWithRatio transaction.

FeeDelegatedSmartContractDeployWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedSmartContractDeployWithRatio transaction.

note

NOTE: You can create an instance of FeeDelegatedSmartContractDeployWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedSmartContractDeployWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedSmartContractDeployWithRatio({...}), please change it to caver.transaction.feeDelegatedSmartContractDeployWithRatio.create({...}).

properties

NameTypeDescription
fromstringThe address of the sender.
inputstringData attached to the transaction. The byte code of the smart contract to be deployed and its arguments. You can get this through caver.abi.encodeContractDeploy.
gasstringThe maximum amount of transaction fee the transaction is allowed to use.
feeRatiostringThe ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.
valuestring(optional, default: '0x0') The amount of KAIA in peb to be transferred. You can use caver.utils.toPeb.
tostring(optional, default: '0x') Address to which the smart contract is deployed. Currently, this value cannot be defined. Specifying the address will be supported in the future.
humanReadableboolean(optional, default: false) This must be false since human-readable address is not supported yet.
codeFormatstring(optional, default: 'EVM') The code format of smart contract code. The supported value, for now, is EVM only. This value is converted to hex string after the assignment(e.g> EVM is converted to 0x0) internally.
signaturesArray(optional) An array of signatures.
feePayerSignaturesArray(optional) An array of feePayerSignatures.
feePayerstring(optional) The address of fee payer.
noncestring(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.
gasPricestring(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.
chainIdstring(optional) The chain id of the kaia network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example


// Create a feeDelegatedSmartContractDeployWithRatio
> caver.transaction.feeDelegatedSmartContractDeployWithRatio({
from: '0x{address in hex}',
input: '0x60806...',
gas: 100000,
feeRatio: 30,
})
// Create a feeDelegatedSmartContractDeployWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedSmartContractDeployWithRatio('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')
FeeDelegatedSmartContractDeployWithRatio {
_type: 'TxTypeFeeDelegatedSmartContractDeployWithRatio',
_from: '0x294f5bc8fadbd1079b191d9c47e1f217d6c987b4',
_gas: '0x493e0',
_nonce: '0xe',
_gasPrice: '0x5d21dba00',
_signatures: [ SignatureData { _v: '0x0fe9', _r: '0x8a20b...', _s: '0x5ba8a...' } ],
_feePayer: '0xc56a1fafa968d64d19b4b81c306ecbab6e489743',
_feePayerSignatures: [ SignatureData { _v: '0x0fe9', _r: '0xa525c...', _s: '0x5ea75...' } ],
_feeRatio: '0x1e',
_to: '0x',
_value: '0x0',
_input: '0x60806...',
_humanReadable: false,
_codeFormat: '0x0'
}

FeeDelegatedSmartContractExecutionWithRatio


caver.transaction.feeDelegatedSmartContractExecutionWithRatio.create(transactionObject)

FeeDelegatedSmartContractExecutionWithRatio represents a fee delegated smart contract execution with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedSmartContractExecutionWithRatio transaction.

FeeDelegatedSmartContractExecutionWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedSmartContractExecutionWithRatio transaction.

note

NOTE: You can create an instance of FeeDelegatedSmartContractExecutionWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedSmartContractExecutionWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedSmartContractExecutionWithRatio({...}), please change it to caver.transaction.feeDelegatedSmartContractExecutionWithRatio.create({...}).

properties

NameTypeDescription
fromstringThe address of sender.
tostringThe address of the smart contract account to be executed.
inputstringData attached to the transaction, used for transaction execution. The input is an encoded string that indicates a function to call and parameters to be passed to this function. You can get this encoded string through caver.abi.encodeFunctionCall.
gasstringThe maximum amount of transaction fee the transaction is allowed to use.
feeRatiostringThe ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.
valuestring(optional, default: '0x0') The amount of KAIA in peb to be transferred. You can use caver.utils.toPeb.
signaturesArray(optional) An array of signatures.
feePayerSignaturesArray(optional) An array of feePayerSignatures.
feePayerstring(optional) The address of fee payer.
noncestring(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.
gasPricestring(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.
chainIdstring(optional) The chain id of the kaia network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example


// Create a feeDelegatedSmartContractExecutionWithRatio
> caver.transaction.feeDelegatedSmartContractExecutionWithRatio({
from: '0x{address in hex}',
to: '0x{address in hex}',
input: '0xa9059...',
gas: 90000,
feeRatio: 30,
})
// Create a feeDelegatedSmartContractExecutionWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedSmartContractExecutionWithRatio('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')
FeeDelegatedSmartContractExecutionWithRatio {
_type: 'TxTypeFeeDelegatedSmartContractExecutionWithRatio',
_from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
_gas: '0xf4240',
_nonce: '0x4d2',
_gasPrice: '0x19',
_signatures: [ SignatureData { _v: '0x26', _r: '0x74ccf...', _s: '0x4c937...' } ],
_feePayer: '0x5a0043070275d9f6054307ee7348bd660849d90f',
_feePayerSignatures: [ SignatureData { _v: '0x25', _r: '0x4a499...', _s: '0x0f8cb...' } ],
_feeRatio: '0x1e',
_to: '0x7b65b75d204abed71587c9e519a89277766ee1d0',
_value: '0xa',
_input: '0x6353586b000000000000000000000000bc5951f055a85f41a3b62fd6f68ab7de76d299b2'
}

FeeDelegatedCancelWithRatio


caver.transaction.feeDelegatedCancelWithRatio.create(transactionObject)

FeeDelegatedCancelWithRatio represents a fee delegated cancel with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedCancelWithRatio transaction.

FeeDelegatedCancelWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedCancelWithRatio transaction.

note

NOTE: You can create an instance of FeeDelegatedCancelWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedCancelWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedCancelWithRatio({...}), please change it to caver.transaction.feeDelegatedCancelWithRatio.create({...}).

properties

NameTypeDescription
fromstringThe address of the sender.
gasstringThe maximum amount of transaction fee the transaction is allowed to use.
feeRatiostringThe ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.
noncestring(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.
signaturesArray(optional) An array of signatures.
feePayerSignaturesArray(optional) An array of feePayerSignatures.
feePayerstring(optional) The address of fee payer.
gasPricestring(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.
chainIdstring(optional) The chain id of the kaia network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example


// Create a feeDelegatedCancelWithRatio
> caver.transaction.feeDelegatedCancelWithRatio({
from: '0x{address in hex}',
nonce: 1,
gas: 25000,
feeRatio: 30,
})
// Create a feeDelegatedCancelWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedCancelWithRatio('0x3af8c18204d219830f424094a94f5374fce5edbc8e2a8697c15331677e6ebf0b1ef845f84326a072efa47960bef40b536c72d7e03ceaf6ca5f6061eb8a3eda3545b1a78fe52ef5a062006ddaf874da205f08b3789e2d014ae37794890fc2e575bf75201563a24ba9945a0043070275d9f6054307ee7348bd660849d90ff845f84326a06ba5ef20c3049323fc94defe14ca162e28b86aa64f7cf497ac8a5520e9615614a04a0a0fc61c10b416759af0ce4ce5c09ca1060141d56d958af77050c9564df6bf')
FeeDelegatedCancelWithRatio {
_type: 'TxTypeFeeDelegatedCancelWithRatio',
_from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
_gas: '0xf4240',
_nonce: '0x4d2',
_gasPrice: '0x19',
_signatures: [ SignatureData { _v: '0x26', _r: '0x72efa...', _s: '0x62006...' } ],
_feePayer: '0x5a0043070275d9f6054307ee7348bd660849d90f',
_feePayerSignatures: [ SignatureData { _v: '0x26', _r: '0x6ba5e...', _s: '0x4a0a0...' } ],
_feeRatio: '0x1e'
}

FeeDelegatedChainDataAnchoringWithRatio


caver.transaction.feeDelegatedChainDataAnchoringWithRatio.create(transactionObject)

FeeDelegatedChainDataAnchoringWithRatio represents a fee delegated chain data anchoring with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedChainDataAnchoringWithRatio transaction.

FeeDelegatedChainDataAnchoringWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedChainDataAnchoringWithRatio transaction.

note

NOTE: You can create an instance of FeeDelegatedChainDataAnchoringWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedChainDataAnchoringWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedChainDataAnchoringWithRatio({...}), please change it to caver.transaction.feeDelegatedChainDataAnchoringWithRatio.create({...}).

properties

NameTypeDescription
fromstringThe address of the sender.
inputstringData of the service chain.
gasstringThe maximum amount of transaction fee the transaction is allowed to use.
feeRatiostringThe ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.
noncestring(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.
signaturesArray(optional) An array of signatures.
feePayerSignaturesArray(optional) An array of feePayerSignatures.
feePayerstring(optional) The address of fee payer.
gasPricestring(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.
chainIdstring(optional) The chain id of the kaia network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example


// Create a feeDelegatedChainDataAnchoringWithRatio
> caver.transaction.feeDelegatedChainDataAnchoringWithRatio({
from: '0x{address in hex}',
gas: 50000,
input: '0xf8a6a...',
feeRatio: 30,
})
// Create a feeDelegatedChainDataAnchoringWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedChainDataAnchoringWithRatio('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')
FeeDelegatedChainDataAnchoringWithRatio {
_type: 'TxTypeFeeDelegatedChainDataAnchoringWithRatio',
_from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
_gas: '0x174876e800',
_nonce: '0x12',
_gasPrice: '0x5d21dba00',
_signatures: [ SignatureData { _v: '0x26', _r: '0xc612a...', _s: '0x0c734...' } ],
_feePayer: '0x33f524631e573329a550296f595c820d6c65213f',
_feePayerSignatures: [ SignatureData { _v: '0x25', _r: '0xa3e40...', _s: '0x6707e...' } ],
_feeRatio: '0x58',
_input: '0xf8ad8...'
}