caver.kct.kip17

caver.kct.kip17 helps you easily handle a smart contract that implements KIP-17 as a JavaScript object on the kaia blockchain.

The caver.kct.kip17 inherits caver.contract to implement the KIP-17 token contract. The caver.kct.kip17 holds the same properties of caver.contract whereas there are additional methods to implement extra features. This section only introduces the newly added bound methods of the caver.kct.kip17.

The code that implements KIP-17 for caver-js is available on the Kaia Contracts Github Repo. KIP-17 for caver-js supports Ownable interface. Using this, you can designate a contract owner when deploying a contract

For more information about KIP-17, see Kaia Improvement Proposals.

caver.kct.kip17.deploy


caver.kct.kip17.deploy(tokenInfo, deployer)

Deploys the KIP-17 token contract to the kaia blockchain. A contract deployed using caver.kct.kip17.deploy is a non-fungible token that follows the KIP-17 standard.

After successful deployment, the promise will be resolved with a new KIP17 instance.

Parameters

Name	Type	Description
tokenInfo	object	The information needed to deploy KIP-17 token contract on the kaia blockchain. See the below table for the details.
deployer	string \| object	The address in the keyring instance to deploy the KIP-17 token contract. This address must have enough KAIA to deploy. See Keyring for more details. If you want to define your fields to use when sending transactions, you can pass the object type as a parameter. If you want to use Fee Delegation when deploying KIP-17 contracts, you can define the fields related to fee delegation in the object. For the use of these fields, refer to the parameter description of approve.

The tokenInfo object must contain the following:

Name	Type	Description
name	string	The name of the token.
symbol	string	The symbol of the token.

Return Value

PromiEvent: A promise combined event emitter, which is resolved with a new KIP17 instance. Additionally, the following events can occur:

Name	Type	Description
transactionHash	string	Fired right after the transaction is sent and a transaction hash is available.
receipt	object	Fired when the transaction receipt is available. If you want to know about the properties inside the receipt object, see getTransactionReceipt. Receipts from KIP17 instances have an 'events' attribute parsed via abi instead of a 'logs' attribute.
error	Error	Fired if an error occurs during sending.

Token Enrollment

To enroll a token on a block explorer, the contract creator must fill out a submission request form. Make note of the specified information required on the form.
Smart Contract Environment
- Compiler Type: Solidity
- Compiler version: v0.8.4+commit.c7e474f2
- Open Source License Type: MIT
Smart Contract Detail
- Optimization: --optimize-run 200
- Source code: KIP17 Contracts Github Link.
ABI-encoded Value: kip17JsonInterface at dev · kaiachain/caver-js · GitHub

Example


// using the promise
> caver.kct.kip17.deploy({
    name: 'Jasmine',
    symbol: 'JAS',
}, '0x{address in hex}').then(console.log)
KIP17 {
	...
	_address: '0xfA7D967f414468083aDAd85257a2cBD6019693C2',
	_jsonInterface: [
		...
		{
			anonymous: false,
			inputs: [
				{ indexed: true, name: 'owner', type: 'address' },
     			{ indexed: true, name: 'operator', type: 'address' },
     			{ indexed: false, name: 'approved', type: 'bool' }
			],
			name: 'ApprovalForAll',
			type: 'event',
			signature: '0x17307...'
		}
	] 
}
// Send object as second parameter
> caver.kct.kip17.deploy({
        name: 'Jasmine',
        symbol: 'JAS',
    },
    {
        from: '0x{address in hex}',
        feeDelegation: true,
        feePayer: '0x{address in hex}',
    }).then(console.log)
// using event emitter and promise
> caver.kct.kip17.deploy({
    name: 'Jasmine',
    symbol: 'JAS',
}, '0x{address in hex}')
.on('error', function(error) { ... })
.on('transactionHash', function(transactionHash) { ... })
.on('receipt', function(receipt) {
	console.log(receipt.contractAddress) // contains the new token contract address
})
.then(function(newKIP17Instance) {
	console.log(newKIP17Instance.options.address) // instance with the new token contract address
})

caver.kct.kip17.detectInterface


caver.kct.kip17.detectInterface(contractAddress)

Returns the information of the interface implemented by the token contract. This static function will use kip17.detectInterface.

Parameters

Name	Type	Description
contractAddress	string	The address of the KIP-7 token contract

Return Value

Promise returns an object containing the result with boolean values whether each KIP-17 interface is implemented.

Example


> caver.kct.kip17.detectInterface('0x{address in hex}').then(console.log)
{
	IKIP17: true,
	IKIP17Metadata: true,
	IKIP17Enumerable: true,
	IKIP17Mintable: true,
	IKIP17MetadataMintable: true,
	IKIP17Burnable: true,
	IKIP17Pausable: true,
}

caver.kct.kip17.create


caver.kct.kip17.create([tokenAddress])

Creates a new KIP17 instance with its bound methods and events. This function works the same as new KIP17.

NOTE caver.kct.kip17.create is supported since caver-js v1.6.1.

Parameters

See the new KIP17.

Return Value

See the new KIP17.

Example


// Create a KIP17 instance without a parameter
> const kip17 = caver.kct.kip17.create()
// Create a KIP17 instance with a token address
> const kip17 = caver.kct.kip17.create('0x{address in hex}')

new KIP17


new caver.kct.kip17([tokenAddress])

Creates a new KIP17 instance with its bound methods and events.

Parameters

Name	Type	Description
tokenAddress	string	(optional) The address of the KIP-17 token contract, which can be assigned later through `kip17.options.address = '0x1234..'`

Return Value

Type	Description
object	The KIP17 instance with its bound methods and events.

Example


// Create a KIP17 instance without a parameter
> const kip17 = new caver.kct.kip17()
// Create a KIP17 instance with a token address
> const kip17 = new caver.kct.kip17('0x{address in hex}')

kip17.clone


kip17.clone([tokenAddress])

Clones the current KIP17 instance.

Parameters

Name	Type	Description
tokenAddress	string	(optional) The address of the smart contract that deployed another KIP-17 token. If omitted, it will be set to the contract address in the original instance.

Return Value

Type	Description
object	The clone of the original KIP17 instance.

Example


> const kip17 = new caver.kct.kip17(address)
// Clone without a parameter
> const cloned = kip17.clone()
// Clone with the address of the new token contract
> const cloned = kip17.clone('0x{address in hex}')

kip17.detectInterface


kip17.detectInterface()

Returns the information of the interface implemented by the token contract.

Parameters

None

Return Value

Promise returns an object containing the result with boolean values whether each KIP-17 interface is implemented.

Example


> kip17.detectInterface().then(console.log)
{
	IKIP17: true,
	IKIP17Metadata: true,
	IKIP17Enumerable: true,
	IKIP17Mintable: true,
	IKIP17MetadataMintable: true,
	IKIP17Burnable: true,
	IKIP17Pausable: true,
}

kip17.supportsInterface


kip17.supportsInterface(interfaceId)

Returns true if this contract implements the interface defined by interfaceId.

Parameters

Name	Type	Description
interfaceId	string	The interfaceId to be checked.

Return Value

Promise returns boolean: true if this contract implements the interface defined by interfaceId.

Example


> kip17.supportsInterface('0x80ac58cd').then(console.log)
true
> kip17.supportsInterface('0xa22cb465').then(console.log)
false

kip17.name


kip17.name()

Returns the name of the token.

Parameters

None

Return Value

Promise returns string: The name of the token.

Example


> kip17.name().then(console.log)
Jasmine

kip17.symbol


kip17.symbol()

Returns the symbol of the token.

Parameters

None

Return Value

Promise returns string: The symbol of the token.

Example


> kip17.symbol().then(console.log)
JAS

kip17.totalSupply


kip17.totalSupply()

Returns the total number of tokens minted by the contract.

Parameters

None

Return Value

Promise returns BigNumber: The total number of tokens.

Example


> kip17.totalSupply().then(console.log)
10

kip17.tokenURI


kip17.tokenURI(tokenId)

Returns the URI for a given token id.

Parameters

Name	Type	Description
tokenId	BigNumber \| string \| number	The id of the token.

NOTE The tokenId parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns string: The URI of the given token.

Example


> kip17.tokenURI(0).then(console.log)
https://kip17.example/uri-ex-caver.json

kip17.tokenOfOwnerByIndex


kip17.tokenOfOwnerByIndex(owner, index)

Searches the owner's token list for the given index, and returns the token id of a token positioned at the matched index in the list if there is a match.

Parameters

Name	Type	Description
owner	string	The address of the account who owns tokens.
index	BigNumber \| string \| number	The index of a token in owner's token list.

NOTE The index parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns BigNumber: The id of the token.

Example


> kip17.tokenOfOwnerByIndex('0x{address in hex}', 5).then(console.log)
5

kip17.tokenByIndex


kip17.tokenByIndex(index)

Searches the list of all tokens in this contract for the given index, and returns the token id of a token positioned at the matched index in the list if there is a match. It reverts if the index is greater or equal to the total number of tokens.

Parameters

Name	Type	Description
index	BigNumber \| string \| number	The index of a token to be queried.

Return Value

Promise returns BigNumber: The id of the token.

Example


> kip17.tokenByIndex(1).then(console.log)
1

kip17.balanceOf


kip17.balanceOf(address)

Returns the balance of the given account address. The balance of an account in KIP-17 is the total number of NFTs (Non-Fungible Tokens) owned by the account.

Parameters

Name	Type	Description
address	string	The address of the account to be checked for its balance.

Return Value

Promise returns BigNumber: The account balance.

Example


> kip17.balanceOf('0x{address in hex}').then(console.log)
9

kip17.ownerOf


kip17.ownerOf(tokenId)

Returns the address of the owner of the specified token id.

Parameters

Name	Type	Description
tokenId	BigNumber \| string \| number	The id of the token.

Return Value

Promise returns string: The address of the account that owns the given token.

Example


> kip17.ownerOf(8).then(console.log)
0x0e0E95426343d97CC7BB913C7D7DBea065A31814

kip17.getApproved


kip17.getApproved(tokenId)

Returns the address who was permitted to transfer this token, or 'zero' address, if no address was approved. It reverts if the given token id does not exist.

Parameters

Name	Type	Description
tokenId	BigNumber \| string \| number	The id of the token.

Return Value

Promise returns string: The address of the account that has the right to transfer the given token.

Example


// If an approved address exists
> kip17.getApproved(10).then(console.log)
0x23D8E9cae17b22d3DAC65b4F7D2C737C6A7b865d
// If no approved address exists
> kip17.getApproved(3).then(console.log)
0x0000000000000000000000000000000000000000

kip17.isApprovedForAll


kip17.isApprovedForAll(owner, operator)

Returns true if an operator is approved to transfer all tokens that belong to the owner.

Parameters

Name	Type	Description
owner	string	The address of an account that owns tokens and has allowed the operator to send all its tokens.
operator	string	The address of the account approved to send owner's all tokens in place of the owner.

Return Value

Promise returns boolean: true if an operator is approved to send all tokens that belong to the owner.

Example


> kip17.isApprovedForAll('0x{address in hex}', '0x{address in hex}').then(console.log)
false
> kip17.isApprovedForAll('0x{address in hex}', '0x{address in hex}').then(console.log)
true

kip17.isMinter


kip17.isMinter(address)

Returns true if the given account is a minter who can issue new tokens in the current contract conforming to KIP-17.

Parameters

Name	Type	Description
address	string	The address of the account to be checked for having the minting right.

Return Value

Promise returns boolean: true if the account is a minter.

Example


> kip17.isMinter('0x{address in hex}').then(console.log)
true
> kip17.isMinter('0x{address in hex}').then(console.log)
false

kip17.paused


kip17.paused()

Returns true if the contract is paused, and false otherwise.

Parameters

None

Return Value

Promise returns boolean: true if the contract is paused.

Example


> kip17.paused().then(console.log)
true
> kip17.paused().then(console.log)
false

kip17.isPauser


kip17.isPauser(address)

Returns true if the given account is a pauser who can suspend transferring tokens.

Parameters

Name	Type	Description
address	string	The address of the account to be checked for having the right to suspend transferring tokens.

Return Value

Promise returns boolean: true if the account is a pauser.

Example


> kip17.isPauser('0x{address in hex}').then(console.log)
true
> kip17.isPauser('0x{address in hex}').then(console.log)
false

kip17.approve


kip17.approve(to, tokenId [, sendParam])

Approves another address to transfer a token of the given token id. The zero address indicates there is no approved address. There can only be one approved address per token. This method is allowed to call only by the token owner or an approved operator.

Note that this method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
to	string	The address of the account who spends tokens in place of the owner.
tokenId	BigNumber \| string \| number	The id of the token the spender is allowed to use.
sendParam	object	(optional) An object with defined parameters for sending a transaction.

The sendParam object can contain the following:

Name	Type	Description
from	string	(optional) The address from which the transaction should be sent. If omitted, it will be set by `kip17.options.from`. If neither of `from` in `sendParam` object nor `kip17.options.from` were not provided, an error would occur.
gas	number \| string	(optional) The maximum gas provided for this transaction (gas limit). If omitted, it will be set by caver-js via calling `kip17.methods.approve(spender, tokenId).estimateGas({from})`.
gasPrice	number \| string	(optional) The gas price in peb to use for this transaction. If omitted, it will be set by caver-js via calling `caver.klay.getGasPrice`.
value	number \| string \| BN \| BigNumber	(optional) The value to be transferred in peb.
feeDelegation	boolean	(optional, default `false`) Whether to use fee delegation transaction. If omitted, `kip17.options.feeDelegation` will be used. If both omitted, fee delegation is not used.
feePayer	string	(optional) The address of the fee payer paying the transaction fee. When `feeDelegation` is `true`, the value is set to the `feePayer` field in the transaction. If omitted, `kip17.options.feePayer` will be used. If both omitted, throws an error.
feeRatio	string	(optional) The ratio of the transaction fee the fee payer will be burdened with. If `feeDelegation` is `true` and `feeRatio` is set to a valid value, a partial fee delegation transaction is used. The valid range of this is between 1 and 99. The ratio of 0, or 100 and above are not allowed. If omitted, `kip17.options.feeRatio` will be used.

NOTE feeDelegation, feePayer and feeRatio are supported since caver-js v1.6.1.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example


// Send via a sendParam object with the from field given 
> kip17.approve('0x{address in hex}', 10, { from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0x3875c3f3120c1773c3adeb97260808c8a385bf8427bc203d10cbc5d262f67dbc',
	blockNumber: 2650,
	contractAddress: null,
	from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
	...
	status: true,
	to: '0x5e0e6f1f0bdf9a263e1b1bb6e9759ba182982377',
	...
	events: {
		Approval: {
			address: '0x5E0e6F1F0bDf9A263e1B1bB6e9759Ba182982377',
			blockNumber: 2650,
			transactionHash: '0x0ae92570560d64fa103c8be1861c8625d34ac560066398d9ad0d389ad5f7e441',
			transactionIndex: 0,
			blockHash: '0x3875c3f3120c1773c3adeb97260808c8a385bf8427bc203d10cbc5d262f67dbc',
			logIndex: 0,
			id: 'log_55296c9d',
			returnValues: {
				'0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				'1': '0x58746F9D739bC81713E5F5512529876F508a6166',
				'2': '2',
				owner: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				approved: '0x58746F9D739bC81713E5F5512529876F508a6166',
				tokenId: '2',
			},
			event: 'Approval',
			signature: '0x8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b925',
			raw: {
				data: '0x',
				topics: [ '0x8c5be...', '0x00...afd', '0x00...166', '0x00...002' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.approve('0x{address in hex}', 10, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.approve('0x{address in hex}', 10).then(console.log)

kip17.setApprovalForAll


kip17.setApprovalForAll(to, approved [, sendParam])

Approves the given operator to, or disallow the given operator, to transfer all tokens of the owner.

Note that the setApprovalForAll method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
to	string	The address of an account to be approved/prohibited to transfer the owner's all tokens.
approved	Boolean	This operator will be approved if `true`. The operator will be disallowed if `false`.
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.setApprovalForAll('0x{address in hex}', false, { from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0x34379ac5b71f16f41d5171d021ca2945e02c60d9fb7f85fc0127262c2ce72b47',
	blockNumber: 3340,
	contractAddress: null,
	from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
	...
	status: true,
	to: '0x1f15b1a4da5437b29bfb7f248b5e344e6b16b654',
	...
	events: {
		ApprovalForAll: {
			address: '0x1f15B1A4DA5437b29BfB7f248B5e344E6b16b654',
			blockNumber: 3340,
			transactionHash: '0x72fdf23482b9cf164638e6cbdfdf56541a6189c88639e21f076a8a50ef749a50',
			transactionIndex: 0,
			blockHash: '0x34379ac5b71f16f41d5171d021ca2945e02c60d9fb7f85fc0127262c2ce72b47',
			logIndex: 0,
			id: 'log_1069ad22',
			returnValues: {
				'0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				'1': '0x399bE7034F26feFB5AE683e488903B8bE5ad38b8',
				'2': false,
				owner: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				operator: '0x399bE7034F26feFB5AE683e488903B8bE5ad38b8',
				approved: false,
			},
			event: 'ApprovalForAll',
			signature: '0x17307eab39ab6107e8899845ad3d59bd9653f200f220920489ca2b5937696c31',
			raw: {
				data: '0x0000000000000000000000000000000000000000000000000000000000000000',
				topics: [ '0x17307...', '0x00...afd', '0x00...8b8' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.setApprovalForAll('0x{address in hex}', false, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.setApprovalForAll('0x{address in hex}', true).then(console.log)

kip17.transferFrom


kip17.transferFrom(from, to, tokenId [, sendParam])

Transfers the token of the given token id, tokenId from the token owner's balance to another address. The address that was authorized to send the token owner's token (the operator) or the token owner him/herself is expected to execute this token transfer transaction. Thus, an authorized account or the token owner should be the sender of this transaction whose address must be given at sendParam.from or kip17Instance.options.from. Unless both sendParam.from and kip17Instance.options.from are provided, an error would occur. It is recommended to use safeTransferFrom whenever possible instead of this method.

Note that sending this transaction will charge the transaction fee to the transaction sender.

Parameters

Name	Type	Description
from	string	The address of the owner or the approved operator of the given token.
to	string	The address of the account to receive the token.
tokenId	BigNumber \| string \| number	The id of the token you want to transfer.
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.transferFrom('0x{address in hex}', '0x{address in hex}', 2, { from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0x9cae3aa93d327804f333674a77d5d01d8c7908c49749b0d747b6391faa232b58',
	blockNumber: 3592,
	contractAddress: null,
	from: '0x9c4fc0ab840914a29c7deb5cc5c625a4cec3a9cd',
	...
	status: true,
	to: '0x6e611498570bbc8cb127899c4d24e156ec72473a',
	...
	events: {
		Transfer: {
			address: '0x6e611498570bBc8cb127899C4D24e156ec72473a',
			blockNumber: 3592,
			transactionHash: '0x386af961e5acda2c5bd58ec71ee52f579dc2b07a2e5ec97678453f04cc1b709a',
			transactionIndex: 0,
			blockHash: '0x9cae3aa93d327804f333674a77d5d01d8c7908c49749b0d747b6391faa232b58',
			logIndex: 0,
			id: 'log_c2ba5874',
			returnValues: {
				'0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				'1': '0x045796ABC035001CF50274FcA8A2614Abf5dd6bf',
				'2': '2',
				from: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				to: '0x045796ABC035001CF50274FcA8A2614Abf5dd6bf',
				tokenId: '2',
			},
			event: 'Transfer',
			signature: '0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef',
			raw: {
				data: '0x',
				topics: [ '0xddf25...', '0x00...afd', '0x00...6bf', '0x00...002' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.transferFrom('0x{address in hex}', '0x{address in hex}', 2, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.transferFrom('0x{address in hex}', '0x{address in hex}', 2).then(console.log)

kip17.safeTransferFrom


kip17.safeTransferFrom(from, to, tokenId [, data] [, sendParam])

Safely transfers the token of the given token id tokenId from the token owner's balance to another address. The address that was authorized to send the token owner's token (the operator) or the token owner him/herself is expected to execute this token transfer transaction. Thus, an authorized address or the token owner should be the sender of this transaction whose address must be given at sendParam.from or kip17Instance.options.from. Unless both sendParam.from and kip17Instance.options.from are provided, an error would occur.

If the to is a contract address, it must implement IKIP17Receiver.onKIP17Received. otherwise, the transfer is reverted.

Note that sending this transaction will charge the transaction fee to the transaction sender.

Parameters

Name	Type	Description
from	string	The address of the owner or the approved operator of the given token.
to	string	The address of the account to receive the token.
tokenId	BigNumber \| string \| number	The id of the token you want to transfer.
data	Buffer \| string \| number	(optional) The optional data to send along with the call.
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

Return Value

Example


// Send via a sendParam object with the from field given (without data)
> kip17.safeTransferFrom('0x{address in hex}', '0x{address in hex}', 9, { from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0x14c5bebc2be86081d8375ba11edba0e541be1df24c1beced1a9e82e3083a8035',
	blockNumber: 6260,
	contractAddress: null,
	from: '0x80b88b47361cec0baee1947868fc872b784cf91e',
	...
	status: true,
	to: '0xa9066e2b62483bcdf6358874cb87f9e0046e8ad3',
	...
	events: {
		Transfer: {
			address: '0xA9066e2B62483bcdf6358874CB87f9e0046E8ad3',
			blockNumber: 6260,
			transactionHash: '0x0a92436289e70018f9ebef0df5d3ce87874afd8e5058fcc08fefc6de3e0e9b36',
			transactionIndex: 0,
			blockHash: '0x14c5bebc2be86081d8375ba11edba0e541be1df24c1beced1a9e82e3083a8035',
			logIndex: 0,
			id: 'log_c9c17595',
			returnValues: {
				'0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				'1': '0x0F47Ea1A10B8F7D61c894E392EfaC990A314d313',
				'2': '9',
				from: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				to: '0x0F47Ea1A10B8F7D61c894E392EfaC990A314d313',
				tokenId: '9',
			},
			event: 'Transfer',
			signature: '0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef',
			raw: {
				data: '0x',
				topics: [ '0xddf25...', '0x00...afd', '0x00...313', '0x00...009' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.safeTransferFrom('0x{address in hex}', '0x{address in hex}', 9, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Send via a sendParam object with the from field given (with data)
> kip17.safeTransferFrom('0x{address in hex}', '0x{address in hex}', 11, '0x1234', { from: '0x{address in hex}' }).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.safeTransferFrom('0x{address in hex}', '0x{address in hex}', 11).then(console.log)

kip17.addMinter


kip17.addMinter(account [, sendParam])

Adds an account as a minter, who are permitted to mint tokens.

Note that the addMinter method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
account	string	The address of the account to be added as a minter.
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a minter.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.addMinter('0x{address in hex}', { from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0xecd0fb45a32323d5cb14558d1d9299393022d5e7284519598dbd8b14c4c55930',
	blockNumber: 8307,
	contractAddress: null,
	from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
	...
	status: true,
	to: '0x1595b5c1027ed36dcb32e4d39766b896d5b97ecb',
	...
	events: {
		MinterAdded: {
			address: '0x1595b5c1027ed36dCB32e4D39766b896d5B97ecb',
			blockNumber: 8307,
			transactionHash: '0xf8da21958c84aa3ed8bfa5eea0649c5b9a895efa8c7a715196e000bef4f0b8bd',
			transactionIndex: 0,
			blockHash: '0xecd0fb45a32323d5cb14558d1d9299393022d5e7284519598dbd8b14c4c55930',
			logIndex: 0,
			id: 'log_f40a92bf',
			returnValues: {
				'0': '0x90170C1E7E8C14BBf1124f52980372088BA540Dc',
				account: '0x90170C1E7E8C14BBf1124f52980372088BA540Dc',
			},
			event: 'MinterAdded',
			signature: '0x6ae172837ea30b801fbfcdd4108aa1d5bf8ff775444fd70256b44e6bf3dfc3f6',
			raw: {
				data: '0x',
				topics: [ '0x6ae17...', '0x00...0dc' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.addMinter('0x{address in hex}', {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.addMinter('0x{address in hex}').then(console.log)

kip17.renounceMinter


kip17.renounceMinter([sendParam])

Renounces the right to mint tokens. Only a minter address can renounce the minting right.

Note that the renounceMinter method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

If sendParam.from or kip17.options.from were given, it should be a minter with MinterRole.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.renounceMinter({ from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0xe130d7ee71a2c55b3cf4e2bce9ea26e7c2cde556c7f8288abac60121b27c26c8',
	blockNumber: 8542,
	contractAddress: null,
	from: '0xb72f5cf2627e6614984d8a9f27ee426b29191831',
	...
	status: true,
	to: '0xf9d0663fc29c48495f42c0b061cb06df6df76c34',
	...
	events: {
		MinterRemoved: {
			address: '0xF9D0663fC29c48495F42c0b061cB06Df6DF76c34',
			blockNumber: 8542,
			transactionHash: '0x557a4e7b9fd6577ffdb14c2e1f00c0009a7bbda2294502fa765250632b5b0f99',
			transactionIndex: 0,
			blockHash: '0xe130d7ee71a2c55b3cf4e2bce9ea26e7c2cde556c7f8288abac60121b27c26c8',
			logIndex: 0,
			id: 'log_04b47645',
			returnValues: {
				'0': '0xB72F5cF2627e6614984D8A9F27eE426b29191831',
				account: '0xB72F5cF2627e6614984D8A9F27eE426b29191831',
			},
			event: 'MinterRemoved',
			signature: '0xe94479a9f7e1952cc78f2d6baab678adc1b772d936c6583def489e524cb66692',
			raw: {
				data: '0x',
				topics: [ '0xe9447...', '0x00...831' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.renounceMinter({
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.renounceMinter().then(console.log)

kip17.mintWithTokenURI


kip17.mintWithTokenURI(to, tokenId, tokenURI [, sendParam])

Creates a token with the given uri and assigns them to the given account. This method increases the total supply of this token.

Note that the mintWithTokenURI method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
to	string	The address of the account to which the minted token will be issued.
tokenId	BigNumber \| string \| number	The id of the token to be minted.
tokenURI	string	The uri string of token to be minted.
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a minter with MinterRole.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.mintWithTokenURI('0x{address in hex}', 18, tokenURI, { from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0xd2473b9853ad33c5fa0a75187e65733614ed4f8c937d06e239768a5ca32d7c7f',
	blockNumber: 9313,
	contractAddress: null,
	from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
	...
	status: true,
	to: '0x7fbf73709054007f5262692f8faf27dee75ab3a6',
	...
	events: {
		Transfer: {
			address: '0x7FBf73709054007f5262692f8FaF27dEE75Ab3A6',
			blockNumber: 9313,
			transactionHash: '0x17c2eda25c8a817915e3dd77b4fb4838259e8b49ae1c0d8e369167f715a08e7f',
			transactionIndex: 0,
			blockHash: '0xd2473b9853ad33c5fa0a75187e65733614ed4f8c937d06e239768a5ca32d7c7f',
			logIndex: 0,
			id: 'log_d060e77e',
			returnValues: {
				'0': '0x0000000000000000000000000000000000000000',
				'1': '0x203ad91221290901CFDAC9399aCf664499924744',
				'2': '18',
				from: '0x0000000000000000000000000000000000000000',
				to: '0x203ad91221290901CFDAC9399aCf664499924744',
				tokenId: '18',
			},
			event: 'Transfer',
			signature: '0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef',
			raw: {
				data: '0x',
				topics: [ '0xddf25...', '0x00...000', '0x00...744', '0x00...012' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.mintWithTokenURI('0x{address in hex}', 18, tokenURI, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.mintWithTokenURI('0x{address in hex}', 18, tokenURI).then(console.log)

kip17.burn


kip17.burn(tokenId [, sendParam])

Destroys the token of the given token id. Without sendParam.from nor kip17.options.from being provided, an error would occur.

Note that the burn method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
tokenId	BigNumber \| string \| number	The id of the token to be destroyed.
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.burn(14, { from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0x09d8ed5582fdd1c39b0f19f14f065659fe275a60856d86a1840535f6df1a2d51',
	blockNumber: 18237,
	contractAddress: null,
	from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
	...
	status: true,
	to: '0x2032e61c79a951aacef8033adca96fc3b9b747b4',
	...
	events: {
		Transfer: {
			address: '0x2032e61C79A951AACEf8033AdCa96fC3b9b747b4',
			blockNumber: 18237,
			transactionHash: '0x4e377d8d65c8565c7bc91568bcdcc0fddeb46a02a778725e437f368a8d9c6165',
			transactionIndex: 0,
			blockHash: '0x09d8ed5582fdd1c39b0f19f14f065659fe275a60856d86a1840535f6df1a2d51',
			logIndex: 0,
			id: 'log_5af49695',
			returnValues: {
				'0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				'1': '0x0000000000000000000000000000000000000000',
				'2': '14',
				from: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				to: '0x0000000000000000000000000000000000000000',
				tokenId: '14',
			},
			event: 'Transfer',
			signature: '0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef',
			raw: {
				data: '0x',
				topics: [ '0xddf25...', '0x00...afd', '0x00...000', '0x00...00e' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.burn(14, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.burn(14).then(console.log)

kip17.pause


kip17.pause([sendParam])

Suspends functions related to sending tokens.

Note that the pause method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a pauser with PauserRole.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.pause({ from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0xd73c026474b2077a04808ed0ce6713821eaa8afaed476b19d22b28e483747e04',
	blockNumber: 19826,
	contractAddress: null,
	from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
	...
	status: true,
	to: '0x601c11f396e92436df8d9bbaff3fbfec906b7f67',
	...
	events: {
		Paused: {
			address: '0x601C11F396E92436Df8d9bBAFf3fbfEc906B7f67',
			blockNumber: 19826,
			transactionHash: '0x549f7786ca5d2c1877be20126fc51c2418194ecaa8cea536d08f72c2f01919d0',
			transactionIndex: 0,
			blockHash: '0xd73c026474b2077a04808ed0ce6713821eaa8afaed476b19d22b28e483747e04',
			logIndex: 0,
			id: 'log_93d26310',
			returnValues: {
				'0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				account: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
			},
			event: 'Paused',
			signature: '0x62e78cea01bee320cd4e420270b5ea74000d11b0c9f74754ebdbfc544b05a258',
			raw: {
				data: '0x0000000000000000000000001147c04b90d1546d76983e19937ad2cdae8b8afd',
				topics: ['0x62e78...'],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.pause({
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.pause().then(console.log)

kip17.unpause


kip17.unpause([sendParam])

Resumes the paused contract.

Note that the unpause method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a pauser with PauserRole.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.unpause({ from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0x6a9fc0c70853e696e687b119ba95971a42d91616a040ec17afe1fd4803f5a6cb',
	blockNumber: 19845,
	contractAddress: null,
	from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
	...
	status: true,
	to: '0x601c11f396e92436df8d9bbaff3fbfec906b7f67',
	...
	events: {
		Unpaused: {
			address: '0x601C11F396E92436Df8d9bBAFf3fbfEc906B7f67',
			blockNumber: 19845,
			transactionHash: '0x4f0d2767fc36e5062a34753bc447a2c15b476c304f8e9e013ddf06124db33229',
			transactionIndex: 0,
			blockHash: '0x6a9fc0c70853e696e687b119ba95971a42d91616a040ec17afe1fd4803f5a6cb',
			logIndex: 0,
			id: 'log_364c25d2',
			returnValues: {
				'0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
				account: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
			},
			event: 'Unpaused',
			signature: '0x5db9ee0a495bf2e6ff9c91a7834c1ba4fdd244a5e8aa4e537bd38aeae4b073aa',
			raw: {
				data: '0x0000000000000000000000001147c04b90d1546d76983e19937ad2cdae8b8afd',
				topics: ['0x5db9e...'],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.unpause({
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.unpause().then(console.log)

kip17.addPauser


kip17.addPauser(account [, sendParam])

Adds an account as a pauser that has the right to suspend the contract.

Note that the addPauser method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
account	string	The address of the account to be a new pauser.
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a pauser with PauserRole.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.addPauser('0x{address in hex}', { from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0xd9f18912c9666a67a2e7445af0abe5140212955b3d35c491e5475d512fdee7d5',
	blockNumber: 20502,
	contractAddress: null,
	from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
	...
	status: true,
	to: '0x4010afbfbf8d94830b226fc5ff311859af806b90',
	...
	events: {
		PauserAdded: {
			address: '0x4010afbfbF8d94830b226Fc5ff311859AF806B90',
			blockNumber: 20502,
			transactionHash: '0x5f6fef2df70dcbe67e6d74e201005b618da5d53ac2f85ad31fce39226fd1b70b',
			transactionIndex: 0,
			blockHash: '0xd9f18912c9666a67a2e7445af0abe5140212955b3d35c491e5475d512fdee7d5',
			logIndex: 0,
			id: 'log_bf9f8982',
			returnValues: {
				'0': '0xD050b56bB04Da257D144e6b382318A2B8c58b0B2',
				account: '0xD050b56bB04Da257D144e6b382318A2B8c58b0B2',
			},
			event: 'PauserAdded',
			signature: '0x6719d08c1888103bea251a4ed56406bd0c3e69723c8a1686e017e7bbe159b6f8',
			raw: {
				data: '0x',
				topics: [ '0x6719d...', '0x00...0b2' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.addPauser('0x{address in hex}', {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.addPauser('0x{address in hex}').then(console.log)

kip17.renouncePauser


kip17.renouncePauser([sendParam])

Renounces the right to pause the contract. Only a pauser address can renounce its own pausing right.

Note that the renouncePauser method will submit a transaction to the kaia network, which will charge the transaction fee to the sender.

Parameters

Name	Type	Description
sendParam	object	(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a pauser with PauserRole.

Return Value

Example


// Send via a sendParam object with the from field given 
> kip17.renouncePauser({ from: '0x{address in hex}' }).then(console.log)
{
	blockHash: '0x32bb338ca23846478934416d1b1f4152b69a49411d61b316cff8b3a7d62ca91e',
	blockNumber: 20512,
	contractAddress: null,
	from: '0xe04cb220e94e6595427568c954b5d819392813bc',
	...
	status: true,
	to: '0x4010afbfbf8d94830b226fc5ff311859af806b90',
	...
	events: {
		PauserRemoved: {
			address: '0x4010afbfbF8d94830b226Fc5ff311859AF806B90',
			blockNumber: 20512,
			transactionHash: '0x72982fa8a8de25c961cd19bd91aa7acf0111feb8e9026e607d89843bcd8f783a',
			transactionIndex: 0,
			blockHash: '0x32bb338ca23846478934416d1b1f4152b69a49411d61b316cff8b3a7d62ca91e',
			logIndex: 0,
			id: 'log_0a9d1350',
			returnValues: {
				'0': '0xE04cB220e94E6595427568c954b5D819392813bC',
				account: '0xE04cB220e94E6595427568c954b5D819392813bC',
			},
			event: 'PauserRemoved',
			signature: '0xcd265ebaf09df2871cc7bd4133404a235ba12eff2041bb89d9c714a2621c7c7e',
			raw: {
				data: '0x',
				topics: [ '0xcd265...', '0x00...3bc' ],
			},
		},
	},
}
// Using FD transaction to execute the smart contract
> kip17.renouncePauser({
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)
// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.renouncePauser().then(console.log)

caver.kct.kip17.deploy ​

caver.kct.kip17.detectInterface ​

caver.kct.kip17.create ​

new KIP17 ​

kip17.clone ​

kip17.detectInterface ​

kip17.supportsInterface ​

kip17.name ​

kip17.symbol ​

kip17.totalSupply ​

kip17.tokenURI ​

kip17.tokenOfOwnerByIndex ​

kip17.tokenByIndex ​

kip17.balanceOf ​

kip17.ownerOf ​

kip17.getApproved ​

kip17.isApprovedForAll ​

kip17.isMinter ​

kip17.paused ​

kip17.isPauser ​

kip17.approve ​

kip17.setApprovalForAll ​

kip17.transferFrom ​

kip17.safeTransferFrom ​

kip17.addMinter ​

kip17.renounceMinter ​

kip17.mintWithTokenURI ​

kip17.burn ​

kip17.pause ​

kip17.unpause ​

kip17.addPauser ​

kip17.renouncePauser ​

caver.kct.kip17.deploy

caver.kct.kip17.detectInterface

caver.kct.kip17.create

new KIP17

kip17.clone

kip17.detectInterface

kip17.supportsInterface

kip17.name

kip17.symbol

kip17.totalSupply

kip17.tokenURI

kip17.tokenOfOwnerByIndex

kip17.tokenByIndex

kip17.balanceOf

kip17.ownerOf

kip17.getApproved

kip17.isApprovedForAll

kip17.isMinter

kip17.paused

kip17.isPauser

kip17.approve

kip17.setApprovalForAll

kip17.transferFrom

kip17.safeTransferFrom

kip17.addMinter

kip17.renounceMinter

kip17.mintWithTokenURI

kip17.burn

kip17.pause

kip17.unpause

kip17.addPauser

kip17.renouncePauser